How to fit a new tablet into the CollecTin More?

Created by Bettina Kabutz, Modified on Mon, 30 Jun at 6:19 PM by Bettina Kabutz

Fitting a new Android Tablet into the CollecTin More

Step 1: Remove the SumUp / Stripe Card Reader

Below you can find a videos on how to remove and insert your card readers safely.

SumUp Air

Please use the photo below to identify if you have a Tray 1 or Tray 2 for your SumUp.

Tray 1 - Angle Insert - Video: How to Insert / Remove the SumUp Card Reader or

Tray 2 - Slide Insert - Video: How to Insert / Remove the SumUp Card Reader

Stripe Wisepad 3
Video: How to Insert / Remove the Stripe Card Reader

Step 2: Remove the Tablet

> Helpful tools: Flat screwdriver or back of a spoon

Video: How to remove your tablet from the CollecTin More

Step 3: Swap out the SIM cards

> Helpful tools: Tweezers or small flat screwdriver

Video: How to remove the SIM from a 4G A12 / A13 tablet or

Video: How to remove the SIM from a 4G tablet or

Video: How to remove the SIM from a 3G tablet

Step 4: Replace the Y-shaped internal charger cable

> Helpful tools: Flat screwdriver or back of a spoon or flat nosed pliers

Note: If you receive a new card reader tray AND cable, the cable will already be fitted into your new tray, so only focus on the part in the video that shows how the tray is removed and fitted into your CollecTin More.

Video: How to replace the Y-shaped cable inside your CollecTin More

Step 4: Replace the Tablet

Video: How to replace your tablet into the CollecTin More