Factory Hard Reset - 4G Model
[Dispatched November 2021 to July 2022]
This takes the tablet back to a state before modifications we make before shipping, so they would need to be re-done to set it up again.
Before starting the reset, please note down your Fully Single App Kiosk licence code:
> Open Fully Single App Kiosk (> Home Screen, swipe from bottom middle upwards, select app)
> Swipe from top left corner into middle to open the menu
> Settings
> Other Settings
> Volume Licence Key > Write down the Volume Licence Key, as you may need to reinsert this after reset. > Cancel
> Round circle on bottom black bar to take you back to the Home Screen
4G Tablet Factory Reset Process:
Disconnect your CollecTin More from power, by removing the battery or USB Cable for Static Installation from the handle.
The easiest way to remove these is to hold the CollecTin More with the screen facing away from you. Use your thumbnail in the slot along the back of the handle, to push down on the top of it. It will then slide down out of the handle.
Turn the tablet off using the power button.
(It needs to be pressed for 3 seconds for a pop-up menu about shutdown to appear, then select power symbol and OK to shut down.)
Press both the volume up and volume down (using two fingers) and keep pressing them during the next step.
Press and hold the power button for a couple of seconds and release
When you see the sideways text appear on the screen release the volume buttons
Use volume down button (5 presses) to navigate to “Wipe data/Factory reset” and press the power button to select
Next press the volume down button once to select "Factory data reset" and press the power button to confirm
The wiping process will take a few seconds
“Reboot system now” should be selected and press power button once to confirm.
There will be some settings missing and Give A Little will need updating.
Settings / Display / Display size and set this to Large.
Open Settings
➔ Display
⋁ Advanced
➔ Display size set to Large
⬅︎ Back x2
➔ Apps and Notifications
➔ Notifications
⋁ Advanced
➔ Default Notification Sound - change to None - OK
➔ Do Not Disturb
➔ Default Duration - Until you turn off - OK
Turn ON now
➔ Calls - Don’t allow any calls - toggle Allow repeat callers to OFF
⬅︎ Back x2
Recently Sent Google Play Store toggle to OFF
⬅︎ Back
➔ App Info
➔ Digital Wellbeing - Notifications - toggle Show Notifications to OFF
⬅︎ Back x4 times
➔ Network and Internet - toggle Wi-Fi to ON
➔ Wi-Fi - Sprout - zzzzzzzz (8x) Connect
⬅︎ Back
➔ Mobile Network
⋁ Advanced - scroll down
➔ Access Point Names - select Daisy ◉
➔ Daisy - scroll down
➔ APN protocol - select ◉ IPv4
➔ APN roaming protocol - select ◉ IPv4
⋮ Save
⬅︎ Back x3 times
➔ Display size set to Large
⬅︎ Back x2
➔ Apps and Notifications
➔ Notifications
⋁ Advanced
➔ Default Notification Sound - change to None - OK
➔ Do Not Disturb
➔ Default Duration - Until you turn off - OK
Turn ON now
➔ Calls - Don’t allow any calls - toggle Allow repeat callers to OFF
⬅︎ Back x2
Recently Sent Google Play Store toggle to OFF
⬅︎ Back
➔ App Info
➔ Digital Wellbeing - Notifications - toggle Show Notifications to OFF
⬅︎ Back x4 times
➔ Network and Internet - toggle Wi-Fi to ON
➔ Wi-Fi - Sprout - zzzzzzzz (8x) Connect
⬅︎ Back
➔ Mobile Network
⋁ Advanced - scroll down
➔ Access Point Names - select Daisy ◉
➔ Daisy - scroll down
➔ APN protocol - select ◉ IPv4
➔ APN roaming protocol - select ◉ IPv4
⋮ Save
⬅︎ Back x3 times
➔ Give A Little Menu
➔ Check for updates, run update
Make sure your SumUp Air is switched ON
➔ Give A Little Menu
➔ Connect terminal, select the correct SumUp Air if it finds more than one
➔ Connect
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article